Features
( Please refer to solution: Mountains, Highways, Tunnels and Subways )
Complies with 3GPP standard
OMT/ OMC function
Low interference
Application Diagram
Introduction
The R23DB0-WCDMA band selective repeater is designed for WCDMA applications and is ideal for coverage extension at an early stage of 3G network deployment. The R23DB0-WCDMA consists of sharp out of band rejection filters to achieve better sensitivity and isolation between the transmitting and receiving path
Equipped with a remote OMT/OMC function via a wireless modem, it allows the operator easy access to configure the parameters and monitor the repeater
The R23DB0-WCDMA is a cost effective repeater that will cut the overall cost of signal coverage extension without the added need of implementing new Node B sites. The R23DB0-WCDMA can easily applied to large size areas including hotels, parking lots, hyper markets, tourist spots, tunnels and rural areas.
| Specification |
Uplink |
Downlink |
| Frequency Range |
1920~1980MHz |
2110~2170MHz |
| Nominal Bandwidth |
Bandwidth is available upon request |
| Maximum Gain |
≥90dB |
| Manual Gain Control |
31dB in step of 1dB |
| Automatic Gain Control |
≥20dB |
| Gain Flatness |
≤2dB/3.84MHz |
| DL Output Power |
≥33dBm/ total output power |
| Dimensions(H*W*D) |
590*420*220mm |
| Weight |
≤ 35kg |
| Control & Monitoring |
Local control Via RS232 / Remote control GSM Modem |
|
